SNES9x v4.3.7 for PS3 - 模擬器
By Edward Lewis
at 2010-10-21T20:55
at 2010-10-21T20:55
Table of Contents
http://www.brewology.com/?p=1323
SNES9x v4.3.7 for PS3 is released. Developer eiz has ported SNES9X — a Super
Nintendo Emulator — to the PS3.
A word of warning on the resolution changing:
** - NOTE: You may get a black screen if your screen does not support 720p or
you're not on a HDTV/monitor - in that case, try pressing Left again so you
revert back to 480p
In any case, this should be a non-issue on most modern TVs/monitors, or just
for those that do have problems, we're going to look at some ways of first
determining whether the PS3's output device (the monitor/TV) actually
supports said resolution before toggling it.
BTW - to the guy with the Earthbound controller problem (I doubt this is
anything more than your typical HDTV input lag problem, but anyway), try this
-
Go to the Settings menu, set 'Display button input' to ON, return to the ROM
menu by pressing Circle button, then click L2+R2 to go back to the game, then
tell me if you can see button characters on the screen when you press a
button. This might help us determine whether this can all be chalked up to
input lag of your telly, or whether it's a faulty controller.
SNES9x v4.3.7 for PS3 Changelog:
* There's now a build for PS3s with firmwares below 3.41 (basically bigger
than or equal to FW 1.92) and a build for PS3s with firmwares 3.41 or higher.
* You can now switch resolutions inside the Settings screen - go from 480p to
720p or vice versa, hence the need for two builds (480p and 720p) eliminated.
(Halsafar)
* Zipped ROM support (ZIP/JMA) (Squarepusher)
* Savestates are now compressed as well (NOTE: I don't know what this will do
to your pre-existing savestates. Try to back them up first - they're inside
the USRDIR folder of /dev_hdd0/game/SNES90000/)
* Menu looks a whole lot better now at both 480p and 720p; crappy font has
been put out of commission. It's now actually readable (Cmonkey69)
* Games that switch between SNES resolutions (Seiken Densetsu 3/Secret of
Mana) are now both vertically scaled correctly - you don't even notice the
resolution switch anymore. This is only at 480p mode - in 720p mode you will
notice the same effect as you did previously. This will be worked on.
(Halsafar)
* A lot of settings got added to the Settings screen. For instance, it's now
possible (on most PAL games) to run them at 60fps by setting 'Force PAL ROM
to NTSC' to ON. This won't work for every game, however (most games after
1993 came with region protection), and it might even result in a crash
because you're doing something that is not deemed appropriate by either the
SNES hardware or the emulator. A solution for PAL ROMs is worked on.
* You can return to a previous folder inside the ROM menu by pressing the
CIRCLE button.
--
SNES9x v4.3.7 for PS3 is released. Developer eiz has ported SNES9X — a Super
Nintendo Emulator — to the PS3.
A word of warning on the resolution changing:
** - NOTE: You may get a black screen if your screen does not support 720p or
you're not on a HDTV/monitor - in that case, try pressing Left again so you
revert back to 480p
In any case, this should be a non-issue on most modern TVs/monitors, or just
for those that do have problems, we're going to look at some ways of first
determining whether the PS3's output device (the monitor/TV) actually
supports said resolution before toggling it.
BTW - to the guy with the Earthbound controller problem (I doubt this is
anything more than your typical HDTV input lag problem, but anyway), try this
-
Go to the Settings menu, set 'Display button input' to ON, return to the ROM
menu by pressing Circle button, then click L2+R2 to go back to the game, then
tell me if you can see button characters on the screen when you press a
button. This might help us determine whether this can all be chalked up to
input lag of your telly, or whether it's a faulty controller.
SNES9x v4.3.7 for PS3 Changelog:
* There's now a build for PS3s with firmwares below 3.41 (basically bigger
than or equal to FW 1.92) and a build for PS3s with firmwares 3.41 or higher.
* You can now switch resolutions inside the Settings screen - go from 480p to
720p or vice versa, hence the need for two builds (480p and 720p) eliminated.
(Halsafar)
* Zipped ROM support (ZIP/JMA) (Squarepusher)
* Savestates are now compressed as well (NOTE: I don't know what this will do
to your pre-existing savestates. Try to back them up first - they're inside
the USRDIR folder of /dev_hdd0/game/SNES90000/)
* Menu looks a whole lot better now at both 480p and 720p; crappy font has
been put out of commission. It's now actually readable (Cmonkey69)
* Games that switch between SNES resolutions (Seiken Densetsu 3/Secret of
Mana) are now both vertically scaled correctly - you don't even notice the
resolution switch anymore. This is only at 480p mode - in 720p mode you will
notice the same effect as you did previously. This will be worked on.
(Halsafar)
* A lot of settings got added to the Settings screen. For instance, it's now
possible (on most PAL games) to run them at 60fps by setting 'Force PAL ROM
to NTSC' to ON. This won't work for every game, however (most games after
1993 came with region protection), and it might even result in a crash
because you're doing something that is not deemed appropriate by either the
SNES hardware or the emulator. A solution for PAL ROMs is worked on.
* You can return to a previous folder inside the ROM menu by pressing the
CIRCLE button.
--
Tags:
模擬器
All Comments
Related Posts
(CPS1 for PSP) Unofficial CPS1PSP 2-5D
By Poppy
at 2010-10-21T12:51
at 2010-10-21T12:51
ykhwong's DOSBox 0.74 SVN build (10/21/2010)
By George
at 2010-10-21T12:46
at 2010-10-21T12:46
PC6001VW ver 306
By Christine
at 2010-10-21T12:44
at 2010-10-21T12:44
Jpcsp SVN r1800
By Skylar DavisLinda
at 2010-10-21T10:17
at 2010-10-21T10:17
GameEx v11.30
By Freda
at 2010-10-21T10:16
at 2010-10-21T10:16