GB/GBC for Dingoo A320 Dingoo Gnuboy 1.0 - 模擬器
By Doris
at 2009-09-30T11:43
at 2009-09-30T11:43
Table of Contents
2009.09.29
DINGOO GNUBOY
- dingoo gnuboy is a port of gnuboy for the dingoo with some extra
options. It has been ported by joyrider aka willems davy.
how to install ?
- copy GNUBOY.SIM in the A:\GAME\ directory, it MUST be placed there
and nowhere else !
- Once you did this you can copy over roms to any directory you like
on the dingoo. The roms must be unzipped and have either a .gb or
.gbc extention.
how to play ?
- Once you copied your games and the sim file just use the
"intresting games" menu to browse to the roms and run them.
The default keys are the same as on the gameboy being:
- A : A
- B : B
- Select : Select
- Start : Start
- L : QuickSave to selected saveslot
- R : QuickLoad from selected saveslot
- Y and X does nothing !
The menu?
- Holding select+start will bring you to the menu where you can
change diffrent options.
- like showing the showing fps counter, the screen mode, sound
volume, frameskip or save load a state as well as quiting
the emulator.
option notes:
- the frameskip option will skip one out of 2 frames so instead of
rendering 60 frames per second it will only render 30 frames per
second, this will speed up certain games at the cost of loosing
frames. Experiment with it
- there are 3 screen modes : Aspect FS which stretches the screen
but keeping aspect ratio, Stretched full screen and native.
During native mode you will see a frame around the screen this
frame can be customized ! by default the emulator will first
look for game sepecific frames being .tga if it doesn′t find
it it will look for the file name gnuboy.tga in the folder where
you loaded the rom from, if it doesn′t find that one it will do
a final check in A:\game\ for a gnuboy.tga and load that one.
If they all fail the default frame will be loaded.
- about frames : The frames have to be a 320x240 uncompressed tga
image ! do not try to use another format or another resolution.
- Save State and load state will display a number besides them this
is the saveslot which is a number between 1 and 9 so you can have
up to 9 savestates per game (rom).
the rest of the options should be obvious.
______________________________________________________________________________
下載:http://ppt.cc/4bgS
來源:http://dl.openhandhelds.org/cgi-bin/dingoo.cgi?0,0,0,0,71,159
--
這一台要是再便宜一點,我就會買了~
--
莫 再 提 莫 再 吵 莫 再 問 莫 再 捧 莫 再 信 莫 再 爭
莫 再 講 莫 再 聞 莫 再 理 莫 再 叫 莫 再 貶 莫 再 寫
莫 再 說 莫 再 想 莫 再 求 莫 再 打 莫 再 用
莫 再 扯 莫 再 婊 莫 再 罵 莫 再 扛
莫 再 聊 莫 再 管 莫 再 傳 莫 再 投
--
DINGOO GNUBOY
- dingoo gnuboy is a port of gnuboy for the dingoo with some extra
options. It has been ported by joyrider aka willems davy.
how to install ?
- copy GNUBOY.SIM in the A:\GAME\ directory, it MUST be placed there
and nowhere else !
- Once you did this you can copy over roms to any directory you like
on the dingoo. The roms must be unzipped and have either a .gb or
.gbc extention.
how to play ?
- Once you copied your games and the sim file just use the
"intresting games" menu to browse to the roms and run them.
The default keys are the same as on the gameboy being:
- A : A
- B : B
- Select : Select
- Start : Start
- L : QuickSave to selected saveslot
- R : QuickLoad from selected saveslot
- Y and X does nothing !
The menu?
- Holding select+start will bring you to the menu where you can
change diffrent options.
- like showing the showing fps counter, the screen mode, sound
volume, frameskip or save load a state as well as quiting
the emulator.
option notes:
- the frameskip option will skip one out of 2 frames so instead of
rendering 60 frames per second it will only render 30 frames per
second, this will speed up certain games at the cost of loosing
frames. Experiment with it
- there are 3 screen modes : Aspect FS which stretches the screen
but keeping aspect ratio, Stretched full screen and native.
During native mode you will see a frame around the screen this
frame can be customized ! by default the emulator will first
look for game sepecific frames being .tga if it doesn′t find
it it will look for the file name gnuboy.tga in the folder where
you loaded the rom from, if it doesn′t find that one it will do
a final check in A:\game\ for a gnuboy.tga and load that one.
If they all fail the default frame will be loaded.
- about frames : The frames have to be a 320x240 uncompressed tga
image ! do not try to use another format or another resolution.
- Save State and load state will display a number besides them this
is the saveslot which is a number between 1 and 9 so you can have
up to 9 savestates per game (rom).
the rest of the options should be obvious.
______________________________________________________________________________
下載:http://ppt.cc/4bgS
來源:http://dl.openhandhelds.org/cgi-bin/dingoo.cgi?0,0,0,0,71,159
--
這一台要是再便宜一點,我就會買了~
--
莫 再 提 莫 再 吵 莫 再 問 莫 再 捧 莫 再 信 莫 再 爭
莫 再 講 莫 再 聞 莫 再 理 莫 再 叫 莫 再 貶 莫 再 寫
莫 再 說 莫 再 想 莫 再 求 莫 再 打 莫 再 用
莫 再 扯 莫 再 婊 莫 再 罵 莫 再 扛
莫 再 聊 莫 再 管 莫 再 傳 莫 再 投
--
Tags:
模擬器
All Comments
By Kelly
at 2009-10-04T03:02
at 2009-10-04T03:02
By Ida
at 2009-10-06T08:28
at 2009-10-06T08:28
By Daph Bay
at 2009-10-09T14:52
at 2009-10-09T14:52
By Skylar DavisLinda
at 2009-10-12T08:39
at 2009-10-12T08:39
Related Posts
bsnes v0.052 released
By Sandy
at 2009-09-29T17:46
at 2009-09-29T17:46
(MAME Front-end) EmuLoader v5.8.3
By Adele
at 2009-09-29T12:06
at 2009-09-29T12:06
(MD/32X/CD/SMS/GG) Kega Fusion v3.62
By Jacky
at 2009-09-29T11:57
at 2009-09-29T11:57
WinUAE v2.0.0 Beta 16
By Necoo
at 2009-09-28T23:50
at 2009-09-28T23:50
VisualBoyAdvance-M SVN r913
By Queena
at 2009-09-28T23:47
at 2009-09-28T23:47