CFW 4.30 on OFW 3.56 - 改機

Sarah avatar
By Sarah
at 2012-11-05T01:45

Table of Contents

http://goo.gl/Do6P1

We have very good news on the scene side of Playstation 3. Spanish sceners
Varicela and Luckymas have found a way to install a custom firmware (4.30 to
be exact) on consoles that runs at least, an official firmware version of
3.56 installed by default (A.K.A you bought the console with this firmware
already installed) but it seems that it works with consoles with firmwares up
to 4.31 or also below 3.55.

For you all that got a PS3 with 3.56 firmware, you're in luck.

Varicela and Luckymas and I have managed to install CFW 4.30 E3 in these kind
of consoles.

In addition, we want to add that these patch are already valid for installing
4.30 CFW E3 from any OFW not higher than 4.31 or in consoles with a firmware
below 3.55, skipping the downgrade process, the use of a dongle and the
factory method.

At the moment, this only works on NOR memories, the NAND ones will be updated
once we test it.

The following patches are needed: Patchv1 Three Musketeers

There is no need for a dongle but you need to use a flasher for getting our
dump. Several tutorials are available at Elotrolado.net to perform this with
progskeet, E3 or tensy.

Once we get or dump, we need to patch the following offsets:

Code:

patch1 : OFFSET 0C0010 LEGHT 6FFFE0
patch2 : OFFSET 7C0010 LEGHT 6FFFE0
patch3 : OFFSET 80000 LEGHT 20000
patch4 : OFFSET A0000 LEGHT 20000
patch5 : OFFSET 40000 LEGHT 20000
patch6 : OFFSET 60000 LEGHT 20000

Once patched, we write it with a flasher, power on the PS3 and it boot up in
recovery mode. We need a flashdrive with the CFW 4.30 E3 on the PS3/UPDATE
folder to install.

TESTED ON SEVERAL 3.56 OFW FACTORY CONSOLES (WE SUPPOSE THAT FACTORY OFW 3.60
CONSOLES DOESN'T WORK BUT WE HAVEN'T TESTED IT)

WE ARE NOT RESPONSIBLE OF ANY MISUSE OF THIS METHOD.

INFORMATION TO CONSIDER:

OFW 3.56 factory Playstation 3. You will not be able to downgrade from
4.30 but you can upgrade with future patches
These patches are only for installing CFW 4.30 E3. Any other CFW will
show you "Corrupted data" if you try to install them from the Recovery menu.

END

******

不太好用的樣子=.= ,而且也要用晶片燒錄器

--

____ _ _ _ _ ____ _ _ ____ _____ ____
(_ _)( \( )( \/ )( ___)( \( )(_ _)( _ )( _ \
_)(_ ) ( \ / )__) ) ( )( )(_)( ) /
(____)(_)\_) \/ (____)(_)\_) (__) (_____)(_)\_)


--
Tags: 改機

All Comments

Heather avatar
By Heather
at 2012-11-06T21:18
會停在3.56的人也很少吧?不是出清就是直升上去了

版本確認問題

Belly avatar
By Belly
at 2012-11-05T00:17
在10年無聊把我姊家裡的WII拿來研究一翻 當時有改成功,可以讀備份片,也可以用USB讀取 但是我忘記當初版本是多少了(4.2那時候出了嗎?10年67月那邊) 我姊也說他後來不知道有沒有升級。 今天我開機 HBC還健在也還能進去 在HBC裡面按HOME鍵右上角是寫 1.0.6 ios61 v21. ...

Rogero CEX-4.30更換硬碟教學

Yedda avatar
By Yedda
at 2012-11-04T19:36
補充一下 如果你硬碟壞掉 直接換 也是要照下面步驟 分三步 1.下載降級固件4.25--andgt;3.55 下載後 在安全模式下 系統更新 此時系統會顯示 4.21~4.30 這時已經是3.55 2.下載V3.7A 安裝 RogeroCEX-3.55 CFW V3.7 一樣在安全模式 ...

4.30R出現錯誤代碼8002291B

Jessica avatar
By Jessica
at 2012-11-03T20:32
閒閒沒事把退休已久的初期型60G試裝上Rogero CEX4.30 v1.0 看著版上及網路上的教學一路順利完成,multiman也更新到4.09 把手邊的BIO6(日版)裝進內接硬碟後,進mm圈選了內置碟跟直接運行二項 進去後直接出來這個錯誤代碼,說是無法寫入獎盃資料還什麼的 請問是我有漏了什麼沒注意到而導 ...

MM 04.09設置問題

Ingrid avatar
By Ingrid
at 2012-11-03T13:19
我照著MM設置,把options.ini放到/dev_hdd0/game/BLES80608/USRDIR/裡,但是我從外置 硬碟傳到內置硬碟時,它會幫我傳到/dev_hdd0/game裡而不是傳到GAMES裡,導致我game資 料夾裡的東西都讀不到. 請問該怎麼設置才好呢?? - ...

主機中不知名的改機晶片

Mason avatar
By Mason
at 2012-11-03T05:36
一直都非常喜歡「零」fatal frame系列作品 最近收了一台PS2 薄機 想要作為日式恐怖遊戲專用機 由於讀取不順暢 拆機想要整理一下內部 發現裡面有一枚不知名的改機晶片 晶片上寫著GZ-U G-1 http://i.imgur.com/Qdj2e.jpg 上網Google查了半天 但都找不到該晶片 ...