Agat Emulator v1.19 - 模擬器

By Frederica
at 2011-03-23T14:04
at 2011-03-23T14:04
Table of Contents
http://sourceforge.net/projects/agatemulator/
Agat Emulator v1.19 is released. Agat Emulator is an Apple ][ and Agat 7/9
(soviet clones of apple) software simulation program for Win32.
Agat Emulator v1.19 Changelog:
Changes in the version 1.19
===========================
Version 1.19 contains implementation of CMS SCSI card.
This SCSI card was compatible with all models of Apple II.
SCSI emulation module allows to connect up to 3 virtual hard drives with
specified SCSI bus ids.
Each drive with size larger than 32MB (maximum ProDOS size) will be divided
to several logical partitions.
Only two of logical devices will be available to use from ProDOS.
To specify which partitions will be available to ProDOS, press left Alt key
during system startup as it was with original CMS card.
This release contains example of 64MB SCSI disk with all ProDOS, Basic and
hardware utilities for CMS card.
Second logical partition of this disk was formatted as empty ProDOS volume
/PART2.
To create your own SCSI disk image, just specify non-existing file name in
controller configuration interface, format you new device by CMS.SYSTEM
utility (low-level format) and create new ProDOS volume by FILER utility.
Good luck!
--
Agat Emulator v1.19 is released. Agat Emulator is an Apple ][ and Agat 7/9
(soviet clones of apple) software simulation program for Win32.
Agat Emulator v1.19 Changelog:
Changes in the version 1.19
===========================
Version 1.19 contains implementation of CMS SCSI card.
This SCSI card was compatible with all models of Apple II.
SCSI emulation module allows to connect up to 3 virtual hard drives with
specified SCSI bus ids.
Each drive with size larger than 32MB (maximum ProDOS size) will be divided
to several logical partitions.
Only two of logical devices will be available to use from ProDOS.
To specify which partitions will be available to ProDOS, press left Alt key
during system startup as it was with original CMS card.
This release contains example of 64MB SCSI disk with all ProDOS, Basic and
hardware utilities for CMS card.
Second logical partition of this disk was formatted as empty ProDOS volume
/PART2.
To create your own SCSI disk image, just specify non-existing file name in
controller configuration interface, format you new device by CMS.SYSTEM
utility (low-level format) and create new ProDOS volume by FILER utility.
Good luck!
--
Tags:
模擬器
All Comments
Related Posts
EMU v1.01 (2011/03/21)

By Kristin
at 2011-03-22T20:06
at 2011-03-22T20:06
JPCSP SVN R2038

By Rosalind
at 2011-03-22T14:50
at 2011-03-22T14:50
(WIP) Supermodel WIP Videos (2011/03/22)

By Edith
at 2011-03-22T11:48
at 2011-03-22T11:48
AWW~千年帝国の興亡~(SS) Guide

By Necoo
at 2011-03-22T11:41
at 2011-03-22T11:41
SS 光明與黑暗續戰篇Ⅲ 王都的巨神

By Oliver
at 2011-03-22T01:32
at 2011-03-22T01:32