8355法揚名國際 - 魔術方塊

By Hamiltion
at 2009-07-11T10:38
at 2009-07-11T10:38
Table of Contents
※ 引述《DavidGuo (大衛郭)》之銘言:
原文
http://www.speedsolving.com/forum/showthread.php?t=10158
: I learned how to solve the cube using the LBL method, but found that 1) the
: middle layer algorithm is too long and 2) there are 4 complicated algorithms
: you need to perform multiple times to solve the last layer.
: I found this 8355 method by Mr. Hsu and I think it is much better. There are
: only 3 easily memorizable algorithms. I would like to know is this method
: available in English?
: Website
: Video
: 8 bottom layer
: Cross on bottom, 3 corners. Total of 8 pieces solved on the bottom. The
: unsolved corner is the keyhole, keep it at FRD.
: 3 edges
: Use keyhole to solve 3 of the 4 middle edges.
: 5 edges
: Use keyhole to solve the remaining 5 edges.
: The last two edges may require you to use algorithm(s).
: Rotate the middle layer until the unsolved edge is at FR.
: Rotate the top layer until the unsolved edge is at TR.
: If the two edges are in the incorrect location need to be swapped, apply
: algorithm 1: (hold F face with left hand) F'U' FU' F'U' F
: If the two edges are in the correct location but need to be flipped, apply
: algorithm 2: (hold F face with left hand) F'U FU' (hold R face with right
: hand) RU' R
: You may need to use both algorithms.
: 5 corners
: Now the cube is solved except for 5 corners. Hold the cube so that there are
: 4 unsolved corners on the top face and 1 unsolved corner at FRD.
: Look at where the corner currently at FRD is supposed to go. Rotate U until
: the place it is supposed to go is directly above it at FRU.
: Perform algorithm 3: R'B'RB
: until FRU is solved. The bottom layer of the cube will be messed up but that
: doesn't matter. Again look at FRD, turn U layer, and repeat alg. 3 until done!
: It may be the case that the top layer is done but the bottom layer is messed
: up. If this happens, repeat alg.3 until all the cube is done except for 2
: corners. Rotate the cube until the two unsolved corners are at FRU and FLU.
: Repeat alg.3 until corner at FRU is done. Perform U'. Again repeat alg.3
: until corner at FRU is done. U and you're done!
: I like this method because it feels more like solving the cube instead of
: just recalling some formulas. i tried teaching some people and they can
: generally get it after a few times. (Alg.1&2 take a bit longer.) There are 2
: more algorithms you can learn to make it faster. (will post later)
: 內容大致上是說8355非常好,只需3個簡單的公式即可,原po(felix)貼了許老師的網頁聯結,
: 不過內容是中文的,他想要知道是否有英文的版本?
: 不過話雖如此,他還是自己把所知道的8355法用英文敘述了一次。
: 然後他說他很喜歡8355法勝於一般的LBL方式,felix試著教了幾個人,都一下子就學會了。
: 原po說若再多背兩個公式,可以讓8355法最後的5變的更快。
: 後來有兩個人回文,說這種留工作區的方法叫keyhole method,是以前就有的方法。
: 我覺得keyhole翻譯的還蠻棒的!
: 許老師,要不要考慮在你的網頁上放上英文版的8355法,應該會很紅!
昨天有人在我的留言板留言,質疑 8355 法不是我發明的
他幾年前從國外網站學到了,懷疑我是參考國外的轉法
當然這篇文,我只是在澄清這件事情
8355 轉法,嚴格說起來
最早是我發明基本架構跟解法,請參考 10936 篇 #180zViqv
我並沒有參考國外網站
唯一參考的,是狐小心法和 bb511 公式
狐小心法並不是公式,是一種觀念
bb511 公式 http://teach.ymhs.tyc.edu.tw/t1086/RC/l3-8355/8355-4-pre.htm
b 哥說是糖果兄教的,糖果兄說是看某國外高手教的
設想一種狀況:
有沒有可能,你跟古代人想到同樣的事情?
這個古代人,並沒有冤魂纏著你,訴說他的冤屈
也沒有留下線索,告訴你他的想法
但是不能因為他先想過了,就說你的想法是參考他的....
確實是你自己想的,也跟他無關連。所以可以說,這是你發明的
或者可以說,你跟古代人,都有發明這個東西。(但不會說一起發明的)
當初 8355 確實沒有參考國外的網站
我想出基本架構,多位板友 CHCOOBOO、大貓及眾位研究歸零想法的高手
讓 8355 轉法更完美
所以嚴格說起來,我只是起個頭,大家一起發明這個轉法
感謝 chevy 兄在這個討論板,幫忙我們發聲
http://www.speedsolving.com/forum/showthread.php?t=10158
有人說 8355 是抄襲國外的,我很不能接受
我知道第二段的 5,聽說在 1981 年就有人提出
可惜我沒有機會看到(不然當年也許我會開始研究這條路)
如果有人知道網址,請幫忙連一下
目前我知道有類似 8355 的解法,有幾個網站
http://www.rubik.com.cn/new.htm
http://www.ryanheise.com/cube/edges_first.html
http://www.qdnbp.com/zhanghui/Blogs/mofang/200902/20090203133356.Html
(對岸張老師有註明是從我這裡轉過去的)
如果有其他的網站,請大家提供一下
這不是在拆自己的台
但是如果有人提出質疑的時候,我們應該有萬全的準備
我記得,好像以前有人貼過,第四段 5 的兩段式轉法影片
我只記得他的搬角有點麻煩...
再舉個例子:FSC手法:RUR'U' 大家都會用
8355 加速法是用這個手法去解
如果這是十年前某甲發明的
那我們就得說「8355加速法是參考某甲的」?
應該不能這樣解讀
這個轉法,也許是某甲發明的沒錯
但是看是用在什麼地方。他發明時,可能是用在 CFOP 公式上
但我們在解決另外一種形式,只是採用這種轉法,搭配另外一些方法
應該可以說,我們發明了另外一種解法(而不是轉法)
-----------------------
各位板友有什麼新發現,記得不要藏拙,勇敢地發表出來
先發表,板友都會給意見
板友都是溫和的,給的意見都很實際
以後各位要讀碩士、博士,就是這樣子,要把自己的東西講出來
有的老闆、同學都是很兇的,給意見罵得不留情面
所以現在先練習
而且,以後有別人發表新的東西,跟你的一樣,時間在你之後
你就有證據說,是你先發明的。PTT發文都有時間資料,板主也會幫你 m 起來
-----------------------
十二月我可能會去北京一趟
是老闆要帶我去參加數學的研討會
不知道有沒有機會,跟大陸的玩家交流一下...
8355 英文板的網頁,可能要等九月碩士畢業之後,才有機會處理...
--
rehearttw 許老師(Reheart-易懷),愛生公式,愛胡思亂想
自 1980 年摸魔術方塊,1981 年學基本公式,2006 年學 CFOP
許技江的第五個魔術方塊網頁 http://teach.ymhs.tyc.edu.tw/t1086/R-C.htm
縮網址:http://kuso.cc/4dff(98/1/6換址)
益智玩具:http://teach.ymhs.tyc.edu.tw/t1086/puzzle.htm http://kuso.cc/4dfc
個人網頁:http://kuso.cc/KfE 請多多指教!
--
原文
http://www.speedsolving.com/forum/showthread.php?t=10158
: I learned how to solve the cube using the LBL method, but found that 1) the
: middle layer algorithm is too long and 2) there are 4 complicated algorithms
: you need to perform multiple times to solve the last layer.
: I found this 8355 method by Mr. Hsu and I think it is much better. There are
: only 3 easily memorizable algorithms. I would like to know is this method
: available in English?
: Website
: Video
: 8 bottom layer
: Cross on bottom, 3 corners. Total of 8 pieces solved on the bottom. The
: unsolved corner is the keyhole, keep it at FRD.
: 3 edges
: Use keyhole to solve 3 of the 4 middle edges.
: 5 edges
: Use keyhole to solve the remaining 5 edges.
: The last two edges may require you to use algorithm(s).
: Rotate the middle layer until the unsolved edge is at FR.
: Rotate the top layer until the unsolved edge is at TR.
: If the two edges are in the incorrect location need to be swapped, apply
: algorithm 1: (hold F face with left hand) F'U' FU' F'U' F
: If the two edges are in the correct location but need to be flipped, apply
: algorithm 2: (hold F face with left hand) F'U FU' (hold R face with right
: hand) RU' R
: You may need to use both algorithms.
: 5 corners
: Now the cube is solved except for 5 corners. Hold the cube so that there are
: 4 unsolved corners on the top face and 1 unsolved corner at FRD.
: Look at where the corner currently at FRD is supposed to go. Rotate U until
: the place it is supposed to go is directly above it at FRU.
: Perform algorithm 3: R'B'RB
: until FRU is solved. The bottom layer of the cube will be messed up but that
: doesn't matter. Again look at FRD, turn U layer, and repeat alg. 3 until done!
: It may be the case that the top layer is done but the bottom layer is messed
: up. If this happens, repeat alg.3 until all the cube is done except for 2
: corners. Rotate the cube until the two unsolved corners are at FRU and FLU.
: Repeat alg.3 until corner at FRU is done. Perform U'. Again repeat alg.3
: until corner at FRU is done. U and you're done!
: I like this method because it feels more like solving the cube instead of
: just recalling some formulas. i tried teaching some people and they can
: generally get it after a few times. (Alg.1&2 take a bit longer.) There are 2
: more algorithms you can learn to make it faster. (will post later)
: 內容大致上是說8355非常好,只需3個簡單的公式即可,原po(felix)貼了許老師的網頁聯結,
: 不過內容是中文的,他想要知道是否有英文的版本?
: 不過話雖如此,他還是自己把所知道的8355法用英文敘述了一次。
: 然後他說他很喜歡8355法勝於一般的LBL方式,felix試著教了幾個人,都一下子就學會了。
: 原po說若再多背兩個公式,可以讓8355法最後的5變的更快。
: 後來有兩個人回文,說這種留工作區的方法叫keyhole method,是以前就有的方法。
: 我覺得keyhole翻譯的還蠻棒的!
: 許老師,要不要考慮在你的網頁上放上英文版的8355法,應該會很紅!
昨天有人在我的留言板留言,質疑 8355 法不是我發明的
他幾年前從國外網站學到了,懷疑我是參考國外的轉法
當然這篇文,我只是在澄清這件事情
8355 轉法,嚴格說起來
最早是我發明基本架構跟解法,請參考 10936 篇 #180zViqv
我並沒有參考國外網站
唯一參考的,是狐小心法和 bb511 公式
狐小心法並不是公式,是一種觀念
bb511 公式 http://teach.ymhs.tyc.edu.tw/t1086/RC/l3-8355/8355-4-pre.htm
b 哥說是糖果兄教的,糖果兄說是看某國外高手教的
設想一種狀況:
有沒有可能,你跟古代人想到同樣的事情?
這個古代人,並沒有冤魂纏著你,訴說他的冤屈
也沒有留下線索,告訴你他的想法
但是不能因為他先想過了,就說你的想法是參考他的....
確實是你自己想的,也跟他無關連。所以可以說,這是你發明的
或者可以說,你跟古代人,都有發明這個東西。(但不會說一起發明的)
當初 8355 確實沒有參考國外的網站
我想出基本架構,多位板友 CHCOOBOO、大貓及眾位研究歸零想法的高手
讓 8355 轉法更完美
所以嚴格說起來,我只是起個頭,大家一起發明這個轉法
感謝 chevy 兄在這個討論板,幫忙我們發聲
http://www.speedsolving.com/forum/showthread.php?t=10158
有人說 8355 是抄襲國外的,我很不能接受
我知道第二段的 5,聽說在 1981 年就有人提出
可惜我沒有機會看到(不然當年也許我會開始研究這條路)
如果有人知道網址,請幫忙連一下
目前我知道有類似 8355 的解法,有幾個網站
http://www.rubik.com.cn/new.htm
http://www.ryanheise.com/cube/edges_first.html
http://www.qdnbp.com/zhanghui/Blogs/mofang/200902/20090203133356.Html
(對岸張老師有註明是從我這裡轉過去的)
如果有其他的網站,請大家提供一下
這不是在拆自己的台
但是如果有人提出質疑的時候,我們應該有萬全的準備
我記得,好像以前有人貼過,第四段 5 的兩段式轉法影片
我只記得他的搬角有點麻煩...
再舉個例子:FSC手法:RUR'U' 大家都會用
8355 加速法是用這個手法去解
如果這是十年前某甲發明的
那我們就得說「8355加速法是參考某甲的」?
應該不能這樣解讀
這個轉法,也許是某甲發明的沒錯
但是看是用在什麼地方。他發明時,可能是用在 CFOP 公式上
但我們在解決另外一種形式,只是採用這種轉法,搭配另外一些方法
應該可以說,我們發明了另外一種解法(而不是轉法)
-----------------------
各位板友有什麼新發現,記得不要藏拙,勇敢地發表出來
先發表,板友都會給意見
板友都是溫和的,給的意見都很實際
以後各位要讀碩士、博士,就是這樣子,要把自己的東西講出來
有的老闆、同學都是很兇的,給意見罵得不留情面
所以現在先練習
而且,以後有別人發表新的東西,跟你的一樣,時間在你之後
你就有證據說,是你先發明的。PTT發文都有時間資料,板主也會幫你 m 起來
-----------------------
十二月我可能會去北京一趟
是老闆要帶我去參加數學的研討會
不知道有沒有機會,跟大陸的玩家交流一下...
8355 英文板的網頁,可能要等九月碩士畢業之後,才有機會處理...
--
rehearttw 許老師(Reheart-易懷),愛生公式,愛胡思亂想
自 1980 年摸魔術方塊,1981 年學基本公式,2006 年學 CFOP
許技江的第五個魔術方塊網頁 http://teach.ymhs.tyc.edu.tw/t1086/R-C.htm
縮網址:http://kuso.cc/4dff(98/1/6換址)
益智玩具:http://teach.ymhs.tyc.edu.tw/t1086/puzzle.htm http://kuso.cc/4dfc
個人網頁:http://kuso.cc/KfE 請多多指教!
--
Tags:
魔術方塊
All Comments

By Mary
at 2009-07-15T09:26
at 2009-07-15T09:26

By Lucy
at 2009-07-18T08:39
at 2009-07-18T08:39

By Olivia
at 2009-07-21T01:12
at 2009-07-21T01:12

By Mary
at 2009-07-23T05:05
at 2009-07-23T05:05

By Hedwig
at 2009-07-23T06:24
at 2009-07-23T06:24

By Rae
at 2009-07-26T14:22
at 2009-07-26T14:22

By Jake
at 2009-07-27T11:06
at 2009-07-27T11:06

By Mary
at 2009-07-30T19:46
at 2009-07-30T19:46

By Doris
at 2009-07-31T07:19
at 2009-07-31T07:19

By Skylar Davis
at 2009-08-04T00:08
at 2009-08-04T00:08

By Edward Lewis
at 2009-08-06T13:59
at 2009-08-06T13:59

By Wallis
at 2009-08-08T10:58
at 2009-08-08T10:58

By Regina
at 2009-08-11T13:16
at 2009-08-11T13:16

By Bennie
at 2009-08-14T08:22
at 2009-08-14T08:22
Related Posts
xcomw

By Yedda
at 2009-07-10T20:42
at 2009-07-10T20:42
pyraminx v147258369 8.16

By Ursula
at 2009-07-10T14:33
at 2009-07-10T14:33
想介紹方塊給一些我認識的朋友

By Kristin
at 2009-07-10T13:36
at 2009-07-10T13:36
有方塊的影片

By Zora
at 2009-07-10T12:47
at 2009-07-10T12:47
7/11 7/12彰化台中隨便亂聚

By Sierra Rose
at 2009-07-10T11:34
at 2009-07-10T11:34